Titanium 6Al4V Round Bar

The material of titanium 6Al4V round bar should comply with ASTM standards such as ASTM B348, ASTM B381, AMS4928, and ASTM F136. The chemical composition of titanium 6Al4V round bar is composed of 6% aluminum, 4% vanadium, and the rest titanium.

Why titanium 6Al4V round bars are superior to other titanium rods in certain applications ?

First, TI6AL4V has a higher strength-to-weight ratio compared to other titanium alloys, making it ideal for applications where weight and strength are critical factors.

Second, TI6AL4V has excellent corrosion resistance properties, making it a suitable material for use in harsh environments such as seawater.

Third, TI6AL4V has good biocompatibility, which makes it a popular material for medical implants.

Finally, TI6AL4V is easily weldable and can be machined with relative ease, making it a cost-effective option for many applications.

The tensile strength of TI6AL4V titanium bar and rod is approximately 880 MPa, with a yield strength of 828 MPa .

The material is corrosion resistant and has high toughness and fatigue strength, making it ideal for use in aerospace, medical implants, and other high-stress applications.

Titanium 6Al4V round bar available from Etermetal :

Diameter: ranges from 0.125 inches (3.18 mm) to 6 inches (152.4 mm)

Length: varies from 12 inches (304.8 mm) to 144 inches (3657.6 mm)

Weight: depends on the size and length of the rod, we will calculate and send the detailed information with quotation.

Surface

The surface quality requirements for TI6AL4V titanium bars may vary depending on specific customer requirements. However, some common surface quality standards include:

1. Surface roughness: The surface roughness of the TI6AL4V titanium bar is within a specific range as specified by the customer. Most of the time, the surface is lathed. For small tolerance products for special application, such as h/H6,7,8,9, the surface of the bars and rods would be polished.

2. Surface cleanliness: The surface of the titanium bar is free from any dirt, oil, or other contaminants that could affect its performance.

3. Surface finish: The surface finish of the titanium bar is uniform and consistent, with no scratches, dents, or other defects that could affect its appearance or performance.

Etermetal has a robust quality management system and strict protocols in place to ensure that every batch of our TI6AL4V titanium rods is traceable and meets our high-quality standards. Each batch is assigned a unique identification number that allows us to track the material's entire history, from raw material procurement to final production and inspection. We can guarantee proper material traceability and complete transparency for our customers.

Certificates 

Hot Tags: titanium 6al4v round bar, China titanium 6al4v round bar manufacturers, suppliers, factory, 6al4v eli titanium bar, medicdal titanium round bar, din3 7035 titanium grade 2 bars, grade 23 titanium round bar, Grade 2 Titanium Round Bar, asme sb348 titanium grade 2 rod