At present, the application of titanium materials has been widely used in all walks of life. Today, I will take you to understand what are the methods of cleaning titanium rods？
1. Alkali washing: Soak the titanium rod with 3-5% sodium hydroxide analytically pure solution for 30-60 minutes at a temperature of about 40 degrees. Good in an ultrasonic cleaner. After immersion, flush the inside and outside with filtered deionized water or water for injection until neutral, and measure the conductivity. Blow dry with pure air ≥ 0. 4Mpa pressure.
2. Pickling: soak the titanium rod in 5% nitric acid solution for more than 8 hours at a temperature of 40 degrees. Good in an ultrasonic cleaner. After immersion, flush the inside and outside with filtered deionized water or water for injection until neutral, and measure the conductivity. Blow dry with pure air ≥ 0. 4Mpa pressure.
3. The above two methods can be used alone or in conjunction with each other. If conditions permit, it can be combined with an ultrasonic cleaning machine for good results.
4. Organic matter pollution can be cleaned in combination with surfactants, and the debris pollution system combined with enzyme cleaning has a good effect.
Shaanxi Etermetal Co., Ltd. manufactures and supplies a wide range of titanium rod and bar products. Titanium rods have CP grades and common alloys. If you are looking for high-quality titanium rod products and qualified titanium rod suppliers, welcome to consult and cooperate!
