The common cutting process of titanium plate. GR5 titanium plate is considered to be corrosion-resistant, has high tensile strength and yield strength, and relatively high hardness. Compared with other brands of titanium alloys, the price is still cheap, so it is more and more used as structural parts, spare parts.
Shaanxi Etermetal Co., Ltd. as a titanium plate supplier with many years of experience, can provide various specifications of GR5 titanium plates, welcome to consult. The following is a description of the common process and content of GR5 titanium plates. If semi-automatic cutting is used, the cutting machine should be positioned on the guide rail first, then the guide rail should be set on the plane of the titanium plate. Keep in mind that the order cannot be changed.
The cutting parameters should be appropriate and should be reasonably determined according to the thickness of the titanium plate so that a good cutting effect can be obtained. To check whether the cutting gas is unblocked, if there is a blockage, dredging should be carried out in time. The titanium plate's surface needs to be cleaned before cutting.
And to leave a specific area so that the slag can be blown out. Too near or too far of a distance from the titanium plate's surface to the cutting nozzle should not be used. The titanium plate should have received enough preheating to prevent the cutting operation from being hampered. When slicing objects of various sizes, the little objects should be sliced first, followed by the large objects.
